Purge Gas Generator Systems

The Purge Gas Generator Systems are designed to continuously remove water vapor and CO2 gas from compressed air and inert gases. The units use 13X molecular sieve media with the pressure-swing adsorption process to reduce levels of CO2 to below 1 ppm and reduce water vapor content to less than -100°F dew point. The dual tower design provides continuous uninterrupted operation. CO2-Series requires a compressed air source for operation and the air should be compatible with instrument quality air. These gas generator systems are designed to operate 24 hours per day, 7 days a week. Nitrogen cylinders and dewars can be eliminated with the CO2-PG series gas generator systems.

PURGE GAS GENERATORS SPECIFICATIONS
Model No.	TOC-PG3	CO2-PG14	CO2-PG28	CO2-PG80
Flow Capacities at 100 PSIG (lit/min)
Inlet Flow	13.2	25.1	40	95
Purge Flow	5.5	10.3	17	35
Outlet Flow	7.7	14.8	23	60
*Flow Capacities at 125 PSIG (lit/min)
Inlet Flow	-	-	48	114
Purge Flow	-	-	16	34
Outlet Flow	-	-	32	80
Connections (NPT)
Inlet	1/8"	1/4"	1/4"	1/4"
Outlet	1/8"	1/4"	1/4"	1/4"
Dimensions (Inches)
Height	10.5	12.5	19.5	27.7
Width	12.5	16	17.2	17.2
Depth	4.5	5	6.2	6.2
Weight (Pounds)	6.5	10.8	20	25
Contact factory for additional flow capacities

FEATURES

Reduces CO2 to less than 1ppm
Reduces water vapor to less than 1 ppm
Compact, lightweight design saves space and is easy to install
Inlet filter 0.01 micron coalescing with automatic drain included
Outlet filter/regulator with gauge included
Operating pressure 50 to 120 psig (14 l/m)
Operating pressure 50 to 150 psig (28 & 80 l/m)
Continuous self-regenerative operation
Sound insulated enclosure.115 Volts AC, 6 watts
Power cord with plug included