Request a quote  Request Information 

Manual Desiccant Dryers

Manual desiccant dryers
X-Series manual desiccant dryers offer the most cost effective method to remove moisture form very low flow compressed air systems or those which are only used infrequently. Atmospheric dew points as low as -100°F are obtainable with units available for flows up to 25 SCFM. These dryers are an excellent choice for point-of-use applications such as paint spraying, laboratory instruments and small control air systems.

X-SERIESSPECIFICATIONS
Model No. X06 Transparent Bowl X03 Transparent Bowl

X03

Metal Bowl

 X04 Transparent Bowl

X25

Metal Bowl
Maximum Pressure 150 PSIG 150 PSIG 150 PSIG 150 PSIG 150 PSIG
Maximum Temperature 125°F 125°F 150°F 125°F 150°F
Maximum Continuous Airflow* 5 SCFM 10 SCFM 10 SCFM 10 SCFM 25 SCFM
Total Airflow* 600 SCF 4400 SCF 3168 SCF 4400x2 SCF 11,000 SCF
Weight with Desiccant 1.13 lbs. 7.4 lbs. 6.8 lbs 15.0 lbs 11.2 lbs.
Weigh Desiccant (Alone) 0.25 lbs. 1.8 lbs. 1.3 lbs. 3.6 lbs. 4.4 lbs.
Total Minutes of Operation @ Max Continuous Air flow 120 min. 440 min. 316 min. 880 min. 440 min.
* With Dry Desiccant at 100 psig and 70°F, Saturated Inlet (100% RH)
Ordering Information
Model No. Silica Gel 4A Transparent Bowl Metal Bowl Port Size
X06-02-000 X   X   1/4" NPT
X06-02-U00   X X   1/4" NPT
X03-02-000 X   X   1/4" NPT
X03-02-M00** X     X 1/4" NPT
X03-02-MU0**   X   X 1/4" NPT
X03-02-U00   X X   1/4" NPT
X03-04-000 X   X   1/2" NPT
X03-04-M00** X     X 1/2" NPT
X03-04-MU0**   X   X 1/2" NPT
X03-04-U00   X X   1/2" NPT
X04-02-000 X   X   1/4" NPT
X04-02-M00** X     X 1/4" NPT
X04-02-U00   X X   1/4" NPT
X25-04-000 X     X 1/2" NPT
X25-04-U00   X   X 1/2" NPT
  • Silica gel media provides dry air to -45°F Atmospheric Dew Point. Media can be regenerated @ 350°F.

  • 4A molecular sieve media provides dry air to -100°F Atmospheric Dew Point. Media can be regenerated @ 600°F.

  • ** Moisture Indicator is recommended P/N DRP-95-623

See brochure (PDF) for additional ordering and dryer information
 

FEATURES

  • Lowest initial cost of any type dryer
  • Low pressure drops of less than 1 PSIG
  • Easily and quickly serviced
  • Color change of indicating silica gel or moisture indicator provide an instant status of the dryer
  • No power required
  • Units are small, lightweight and easy to install
  • Color-change silica gel can be regenerated for reuse

TYPICAL APPLICATIONS

  • Paint Spraying
  • Small Control Air Systems
  • Laboratory Instruments
  • Continuous Emissions Monitoring Systems
  • Environmental Instruments